Product Description:

1, with the ability to receive outdoor GPS L1/L2/L5, BDS B1/B2/B3, GLONASS L1/L2, GALILEO E5 frequency signals and forward to the room;

2, with the ability to receive outdoor Beidou RDSS S frequency point signal and forward to the indoor;

3, with the ability to adjust the level of the forwarded output signal;

4, with remote/local control switching function, and through the display screen;

5, with the function of accepting the upper computer query instructions and reporting the working state of the machine;

6. The bottom of the repeater is provided with four plastic support angles, which can be placed smoothly on the plane.

Directions for use

1. The repeater system is connected as shown in the figure below. RFin port DC +5V output is connected to the receiving antenna (full frequency active antenna) through a 30m RF coaxial cable. The RFout port is isolated and connected to the transmitting antenna (full frequency transmitting antenna) by a 30 m RF coaxial cable. The host is powered by 80 to 260V AC.

2. Turn on the switch on the rear panel, and the power indicator is on. At this time, the host is powered on.

3, the repeater built-in CNC attenuator, adjustable range 0~31 dB. The attenuation value has a memory function, the initial state of the startup is the attenuation value set when the last power off, the two adjustment attenuation keys "+" and "-" are recoverable keys, press a attenuation plus or minus 1dB, and hold down to quickly set the attenuation value.