GPS Missile-Borne Antenna

Description：

Product Name: GPS Missile-Borne Antenna
Product Model: DY-AN1616A
Applicable Frequency Band: BDS B1C/B3;  GPS L1;  GLONASS L1     
Product Usage:
This antenna is covering BDS B1C/B3, GLONASS L1 and GPS L1. It has the advantages of smaller size and lower power consumption. It is widely used in navigation and positioning, tracking and monitoring, survey and control, military and other fields. Especially suitable for high-speed moving areas, such as aviation, etc.

Related products

Product Description:

Ø It has high out-of-band rejection and high linearity, ensuring that it can still work normally even if there are strong jamming signals in surrounding area.

Ø Reasonable and effective filter design can prevent out-of-band signal jam.

Ø Built-in voltage stabilizing circuit can operate normally within a wide input voltage.

Electrical Specifications

Frequency Range: 1575±10Mhz

Gain: ≥2 dBi

Polarization: Circular polarization

Axial Ratio: ≤6 dB (Elevation angle 90°)

VSWR: <1.5

LNA Specifications

Gain: 35 dB

VSWR: <2

Noise Figure: <2 dB

Voltage: 3.3~12 VDC

Mechanical Specifications

Output Connector: SMA-J3 (With RG316 cable, cable length 2000/1000mm)

Dimension: 56×49.4×14.5mm

Weight: 80g

Material: Radome: FRP (Epoxy phenolic laminated glass cloth board)

Base plate: Aluminum alloy (6061-T6)

Operating Temperature: -40℃～+70℃

Storage Temperature: -40℃～+85℃

Diagram

GPS Missile-Borne Antenna

PRODUCT

Consult