Tel
+86 13924628001
Product Description:
Ø The antenna array consists of 4 BDS B1, GPS L1, GLONASS L1 anti-jam units.
Ø The amplifier circuit has high out-of-band rejection and high linearity, ensuring that it can still work normally in the presence of strong jamming signals.
Ø Built-in voltage regulator circuit, can work normally in a wide input voltage range.
Main Function:
1. Receive satellite signals from GPS-L1, BDS-B1, Glonass-L1, and Galileo-E1.
2. It can reject various types of broadband and narrowband jamming such as harmonics, frequency sweeps, pulses, white noise, frequency modulation, amplitude modulation, and phase modulation for the GPS-L1, BDS-B1, and Glonass-L1 frequency bands.
Electrical Specifications
Receiving Frequency: 1559-1610 MHz
Anti-Jam Frequency Point: 1601-1575 MHz
Anti-Jam Ability: Single jam ≥ 100dB, triple jam ≥ 85dB
Gain: ≥3dB (Elevation angle 90°)
Signal Output Power: ≤-55dBm
Impedance: 50 ohms
Input Voltage: 18~36V
Power Consumption: ≤15W
Weight: <500g
Operating Temperature: -40℃~ 60℃
Storage Temperature: -55℃~65℃
Interface Definition
The connector model of the digital communication control interface is J30J-15ZK, which provides power supply and serial communication. The interface definition is as follows:
No. | Name | Description |
1 | VCC IN | 18~36V DC Power Supply |
2 | VCC IN | 18~36V DC Power Supply |
3 | GND | GND |
4 | GND | GND |
5 | 422Rx+ | 422 Signal reception+ |
6 | 422Rx- | 422 Signal reception- |
7 | 422-TX+ | 422 Signal transmission+ |
8 | 422-TX- | 422 Signal transmission- |
9 | TTL | +5V |
10 | ||
11 | ||
12 | ||
13 | ||
14 | ||
15 |
Mechanical Specifications
Output Connector: SMA-K /J30J-15ZK
Dimension: 132×132×22 mm
Weight: <500g
Operating Temperature: -40℃~70 ℃
Storage Temperature: -40℃~85℃
Diagram