Tel
+86 13924628001
Product Description:
Ø The BDS B3 and BD1 S dual frequency anti-jam system consists of 4 B3 anti-jam units and 4 BD1 S anti-jam units.
Ø Includes a B1 unit and a BD1 L unit, providing short message sending function.
Ø The mutual coupling between antenna units is small, the directional pattern beam is wide, and the reception effect of low elevation signals is good, ensuring that it can receive satellite normally even though in some places with severe occlusion.
Ø The amplification circuit has high out of band rejection and high linearity, ensuring normal operation in the presence of strong jamming signals in the surrounding area.
Ø Built-in voltage regulator circuit, it can operate normally within a wide input voltage range.
Electrical Specifications
Frequency Range: 1268.52±10.23 MHz
Gain: ≥2.0dB (Elevation angle 90°), ≥-6.0dB (Elevation angle 20°)
VSWR: <1.5
Polarization: RHCP
Polarization Axial Ratio: ≤3dB (Elevation angle 90°)
LNA Gain: 21±1dB, 26±1dB, 31±1dB
Input VSWR:<1.8
Output VSWR:<2
Noise Figure:<2dB
Out of Band Rejection: ≥15 @ 1268.52±45MHz , ≥50@ 1268.52±90MHz, ≥90@ 1616±4MHz, ≥90@ 470±5MHz
Anti Burn Power: ≥30dBm
In Band Group Delay Fluctuation: <1ns @ 1268.52±10.23MHz
Voltage: 3.3±0.1 VDC
Working Current:<60mA
Mechanical Specifications
Dimension: 256 ×150×35mm
Output Connector: TNC-K/J14A-26ZJ
Weight: <2.0kg (Including RF components)
Operating Temperature: -40℃~+65℃
Storage Temperature: -45℃~+70℃
Diagram