Tel
+86 13924628001
Tel：
+86-13924628001
Product Description:
Ø High gain, wide beam, and good signal reception at low elevation angles, ensuring that satellites can still be collected normally in some severely obscured situations.
Ø The four receiving channels are amplified independently without affecting each other, ensuring the redundant design of the system. The pre-filter has excellent out-of-band rejection capability and the anti-burnout capability is greater than 10W.
Ø The emission output is greater than 10W, with good stability and efficiency.
Ø All materials are independently controllable and domestically produced.
Ø Antenna waterproof protection is IP67.
Electrical Specifications
Receiving Frequency Range: B3: 1268.52±10.23MHz B2b: 1207.14±10.23MHz, B1C: 1575.42±16.368 MHz S: 2491.75±8.16 MHz
Polarization: RHCP
Horizontal Coverage Angle: 360°
Gain: ≥-3.5dBi @10°, ≥0dBi @30°, ≥2.5dBi @50°, ≥3dBi @90°
Axial Ratio: ≤3dB
VSWR: ≤1.6
Isolation: ≥15dB (B2/B3/S), ≥9dB (B1)
Transmitting Frequency Range: 1610~1628MHz
Polarization: LHCP
Horizontal Coverage Angle: 360°
Gain: ≥-4dBi @10°, ≥0dBi @30°, ≥2dBi @50°, ≥2~≤5dBi @75°, ≥2~≤5dBi @90°
Axial Ratio: ≤3dB
VSWR: ≤1.6
Isolation: ≥15dB
Power Handling: ≥30W
Low Noise Amplifier Specifications
Frequency Range: B3: 1268.52±10.23MHz B2b: 1207.14±10.23MHz, B1C: 1575.42±16.5MHz S: 2491.75±8.16MHz
Gain: 35±2dB
Gain Variation: ≤3dB (Comparison between high and low temperature and normal temperature)
Input VSWR: ≤2.0
Noise Figure: ≤2dB@B3/B2b/B1C, ≤2.2dB@S
In-Band Flatness: ±1dB @B3/B2b/S(2491.75±4.08MHz)/B1C(1559-1585MHz), ±2.5dB @S/B1C Full frequency band
Output P-1: ≥0dBm
Anti-Burn Power: ≥10W (Protective tube added after pre selected filter)
Out-of-Band Rejection: >50dB@1268.52+/-50MHz, >50dB@1207.14+/-40MHz
>50dB@1575.42+/-50MHz, >50dB@2491.75+/-60MHz, >70dB@1610-1628MHz@B3/B2b/S
Working Current: ≤150@20V
Output Port Feed Voltage: +11~+30V
Output Connector: MCX-K
Power Amplifier Specifications
Frequency Range: 1610~1628MHz
Output P-1 Power: ≥40dBm (Test after filter)
Gain: 40±2dB
Input Signal Level: 0dBm (No abnormality will occur when the input is increased to 5dBm)
VSWR: ≤1.6
Flatness: ±1dB
Amplifier Operating Voltage: +28±1V
Emission Current: ≤1.8A
Activation Threshold Voltage:
3V±1V (When the power amplifier is turned on, the B1C channel does not work, and other reception is not affected)
Out of Band Rejection: ≥70dB@1268.52+/-10.23MHz@B3, ≥70dB@1207.14+/-10.23MHz@B2b, ≥70dB@2491.75+/-8.16MHz@S
Mechanical Specifications
Dimension: Φ118×58mm
One-Way Interface: TNC-K
Weight: <1.0kg
Operating Temperature: -40℃~+65 ℃
Storage Temperature: -40℃~+70 ℃
Diagram
